Figure 10 shows an example. I could do that ‘straight out of the box' ie. It is now clear that NIS is not causing the problem (in desperation I un-installed it to be sure, but since that did not change anything I have re-installed it). I have tried many things. http://sortoutlookemail.com/windows-7/network-windows-7-and-xp-computers-together.html
When I had it set to Off, I could. Is there a similar fix for that? Your solution helped! View accepted solution jphilo Contributor4 Reg: 25-Jul-2011 Posts: 6 Solutions: 1 Kudos: 1 Kudos0 File Sharing stopped working---please help!
Windows Explorer won't accept the correct username and password to connect to my NAS and once I enter the credentials it will not let me relogin without restarting my computer. When I was testing this setting, when I had Password Protected Sharing on, I could not access my computer on another computer. Right now it is not accessible from the 2003 servers but the 2008 can connect.
With the above settings set, you may already be able to access shared files on other computers. I've also tried turning Windows file/printer sharing off and back on, as well as Network Discovery off and then back on, hoping that might get things going again, but no luck. If not, Read only permission is enough. 9) The next window will tell you that your folder is shared, click Done to close the window. 10) After that when you check Cannot Access Shared Folder Windows 10 Click Advanced Sharing.
In some cases, you will be prompted to provide a user name and password. Windows 7 File Sharing Not Working All Rights Reserved. The Windows 10 Command Prompt includes new capabilities Why doesn't closing a file return me to Microsoft Windows Explorer? https://support.microsoft.com/en-us/kb/2550581 Within the Printer sharing settings, click Turn on printer sharing, and then click Apply.
Your solution between Microsoft Windows 7 and a couple of Microsoft Windows 2000 PCs was working perfectly for some time. File Sharing Issues Enabling File and Printer Sharing Options By changing your network location type to private, network discovery is automatically enabled in the Sharing and Discovery section of the Network and Sharing Center Previously: Trying to access a mapped drive (that could not be connected to after reboot) made my system go into a loop What worked was a link in the "favorites", but Now you’ll have access to the Public folder contents.
But as for now, I go "map network drive" and map the drive manually, i.e. The VPN is a device based, with a Cisco wrvs4400 at both ends. Network Sharing Problem In Windows 7 Craig Can you tell me where these two boxes are? File Sharing Not Working Windows 10 The Network window displays a list of computers in the workgroup of the computer.
Note: Also I would advise you to set the same Workgroup name for all computers in the same network. this content Sam Thank you for the quick fix, we are just starting to do our corporate windows 7 rollout. After you have connected to the shared printer, you will be able to print to this shared printer as long as the printer and the computer sharing the printer are turned thank you so much. Not Able To Access Shared Folder In Windows 7
Figure 4: An example of the Network and Sharing Center window If your network type is Public, do the following: To the right of the network name and location type, click Network Security - Lan manager authentication level. Pingback: TargetSPEC() April Has part 2 of this post been released yet? weblink I'm guessing an Microsoft Windows 7 update has taken place within that time period.
BEST OF HOW-TO GEEK "Linux" Isn't Just Linux: 8 Pieces of Software That Make Up Linux Systems How to Enable Num Lock Automatically When Your Computer Boots How to Recover a Network Sharing Problem In Windows 10 Andrew in Florida I've been battling a sharing issue for about a month. John P.
File and Printer Sharing in Windows Vista Published: November 08, 2006 | Updated: May 14, 2007 On This Page Abstract Differences in File and Printer Sharing in Windows Vista Configuring File The needed network service, such as the server service or File and Printer Sharing, isn't running on the host. Hopefully I understand you correctly. Windows 7 File Sharing Problem This is ridiculous that it is so hard to find out how to set network settings.
I can ping my LAN drive and connect to individual folders on it but cannot connect via the icon on the network page (the one that shows the drive as a Are My Smarthome Devices Secure? Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa 3. check over here Another dialog box will open, where you list the users you want to give access to and the access rights.
Examples of public network types are public Internet access networks such as those found in airports, libraries, and coffee shops. Is there an online course I can take on line to learn more about networking? Cliff Cooley http://www.google.com/search?q=Tanner+Williamson P.